In-house or outsource jewelry photos: what the hours really cost

Published

Read

4 min
In-house or outsource jewelry photos: a hand wearing gold rings and a gold cuff on a laptop trackpad at a white desk

If your monthly volume would keep one retoucher busy full time, roughly 240 to 640 jewelry images depending on the finish, editing in-house can pay off. Below that, or when volume swings with the seasons, outsourcing usually costs less. The deciding number is hours: 15 to 40 minutes per image.

Quick answer:

  • One full-time retoucher has about 160 hours a month: 240 to 640 jewelry images at 15 to 40 minutes each.
  • A US photo retoucher averages $24.99 an hour (Indeed, November 2026), before payroll costs, software and equipment.
  • Our levels run $12, $15 and $25 per photo, with 15% to 30% off monthly orders over $500.
  • Outsource for seasonal volume, launches and stone-heavy pieces; keep it in-house for steady volume and same-day changes.
In-house or outsource jewelry photos: a hand wearing gold rings and a gold cuff on a laptop trackpad at a white desk
A hand wearing gold rings and a gold cuff on a laptop trackpad at a white desk.

To compare the finish with your own edits, send us your trial images. It’s free, with no card or sign-up, and a person replies within the hour.

The time math: how many hours your jewelry photos take

Start with hours. A jewelry photo takes 15 to 40 minutes to retouch. That covers dust and fingerprints, a white background and metal tone, plus stones and prongs on the harder pieces. Multiply by your monthly volume, and compare the result with the roughly 160 working hours one person has in a month.

Images a monthEditing hours at 15 to 40 min eachShare of one full-time retoucher
5012 to 33 hoursAbout a tenth to a fifth
30075 to 200 hoursAbout half, up to more than one person
1,000250 to 667 hoursAbout one and a half to four people

The range is wide because the finish is. A plain silver band on white sits near 15 minutes. A pavé ring with focus-stacked frames and prong work sits near 40. A ring listing needs six shots per ring, so the image count grows faster than the product count. Clean capture also moves pieces toward the low end; our guide on how to photograph jewelry covers the shoot.

What in-house costs, and what outsourcing costs

On wages alone, in-house can look cheaper at low finish levels. Once you add the costs that come with an employee, and price the harder pieces, the gap closes or reverses. The table compares wages at Indeed’s US average with our standard level, $15 per photo, after the monthly volume discount.

Images a monthIn-house wages only ($24.99 an hour)Outsourced at the standard level
50About $310 to $830$750, minus 15% = $637.50
300About $1,870 to $5,000$4,500, minus 25% = $3,375
1,000About $6,250 to $16,660$15,000, minus 30% = $10,500

The wage figure is Indeed’s average of $24.99 an hour for a photo retoucher in the United States, from 45 salaries, updated November 3, 2026. Our prices are on the jewelry photo retouching page: $12 basic, $15 standard and $25 high-end per photo. For what other retouchers and AI tools charge, see what retouchers charge per image.

Hidden costs on both sides

Neither option costs only its headline number. In-house adds employment costs and idle time; outsourcing adds briefing time and a delay of a day. Count both before you compare.

In-house adds:

  • Payroll taxes, benefits, holidays and sick days on top of the hourly wage
  • Software subscriptions, a capable computer and a calibrated screen
  • Training on jewelry work: metal tone, stones and prongs are a specialty
  • Quiet months you still pay for, and peaks one person can’t cover
  • Someone to check the work at 100% before it goes live

Outsourcing adds:

  • Time to write a clear brief and agree a spec on the first order
  • A day’s wait: most orders come back within 24 hours, not within the hour
  • Upload time for large RAW files
  • Less control over last-minute changes on the day of a launch

In-house or outsource jewelry photos: when each wins

In-house wins when volume is steady, the work is simple and changes happen daily. Outsourcing wins when volume swings, the pieces are hard or the team has no retoucher yet. Most shops fit one column clearly.

Keep it in-house whenOutsource when
Volume keeps a retoucher busy most of the month, every monthVolume peaks for launches, holidays or wholesale season
You shoot and list daily and need edits within the hourA next-day turnaround works for your listings
Most pieces are plain metal on whiteStones, pavé and high polish need specialist work
You already employ someone skilled with spare hoursNobody on the team retouches today

There are two exceptions. If your images are simple and the budget is tight, an AI tool may be enough. Our comparison of AI vs hand retouching covers where it holds up. And if you are a photographer weighing the same choice for weddings or portraits, our guide to outsourcing photo editing is written for you.

What the finish looks like

The fairest test is your own images, edited both ways. Whatever you compare, check it at 100%: dust, metal tone, stone detail and the edges. Here is that comparison on a sample edit we made.

Before and after of a silver ring with three orange baguette stones: on weathered pink wood before, on a clean white background with a soft shadow after
A sample edit on a Pexels photo, not a client order: the wood background taken to white, a soft contact shadow added, and contrast set on the metal and stones. The ring itself is unchanged.

For one spec held across a set, see our sample ring project: six photos of one ring, edited to a single written spec. It is a sample, not a client order.

How it works with us

Outsourcing to our retouching desk takes four steps, with a written quote inside an hour.

  1. Upload and brief. Send RAW or JPEG files through Drive, Dropbox or our FTP, with your spec.
  2. Quote. Choose the level and services; we reply with a written quote inside an hour.
  3. Review. A second retoucher checks every image at 100% before it ships; you review at full size and send notes.
  4. Deliver and revise. Files come back as JPEG, TIFF or layered PSD in your naming and folders. Revisions on anything we got wrong are free, with no round limit.

Turnaround is 24 hours for most orders, 12 hours on a priority plan, and two to three working days for collections of 500 or more.

What to check before choosing a retoucher

Whoever you hire, the same seven checks separate a reliable retoucher from a risky one. Ask each provider, us included, before the first paid order.

  • A trial on your own images, not a portfolio of someone else’s
  • A written quote per image and level, with volume pricing stated
  • A second check at 100% before files ship
  • Free revisions on errors, with the limit written down
  • Turnaround in writing, including for large orders
  • File security: an NDA and encrypted transfer for unreleased pieces
  • One spec across orders, so a spring shoot and an autumn restock match

Frequently asked questions

Only when volume keeps them busy. At Indeed’s US average of $24.99 an hour, wages alone can undercut outsourcing on simple pieces. Below full-time volume, payroll costs, software, training and quiet months usually close the gap.

About 15 to 40 minutes per image. Plain metal on white sits at the low end; stones, pavé, focus stacks and prong work sit at the high end.

Yes. Many shops keep simple listing photos in-house and send stone-heavy pieces, launches and hero images out. Our single services start from $2.00 per photo for metal cleanup.

Ask before you send anything. We sign NDAs, transfer files encrypted, and route unreleased collections to a separate restricted queue.

Send notes on the full-size files. Revisions on anything we got wrong are free and uncapped, and the trial lets you judge the finish before you pay.

Try it on your own images

The quickest way to decide is to compare. Send us your trial images and edit the same files in-house; the trial is free, with no card or sign-up. Need 1,000+ images a month? Get a volume quote. Or see every level and service a professional jewelry retoucher on our team offers.

Keep reading

Related articles .

Amazon image requirements for jewelry: a gold chain on a light background beside the title
4 min

Amazon image requirements for jewelry sellers

Amazon’s jewelry main image follows two rule sets: the general product image guide, and the jewelry category page, which overrides it in six places. The..

Online store product image size for jewelry: a gold ring on a white display beside the title
4 min

Online store product image size for jewelry: the rules for each channel

Each channel sets its own online store product image size: Amazon wants a pure white main image, Etsy shows a small thumbnail first, and Shopify..

In-house or outsource jewelry photos: a hand wearing gold rings and a gold cuff on a laptop trackpad at a white desk
4 min

In-house or outsource jewelry photos: what the hours really cost

If your monthly volume would keep one retoucher busy full time, roughly 240 to 640 jewelry images depending on the finish, editing in-house can pay..

See it on your garments

Cut returns with cleaner product shots .

Send 2 garment images. We’ll return ghost-mannequin edits free — neck joint, interior and all — so you can see the difference before you commit.