If your monthly volume would keep one retoucher busy full time, roughly 240 to 640 jewelry images depending on the finish, editing in-house can pay off. Below that, or when volume swings with the seasons, outsourcing usually costs less. The deciding number is hours: 15 to 40 minutes per image.
Quick answer:
- One full-time retoucher has about 160 hours a month: 240 to 640 jewelry images at 15 to 40 minutes each.
- A US photo retoucher averages $24.99 an hour (Indeed, November 2026), before payroll costs, software and equipment.
- Our levels run $12, $15 and $25 per photo, with 15% to 30% off monthly orders over $500.
- Outsource for seasonal volume, launches and stone-heavy pieces; keep it in-house for steady volume and same-day changes.

To compare the finish with your own edits, send us your trial images. It’s free, with no card or sign-up, and a person replies within the hour.
The time math: how many hours your jewelry photos take
Start with hours. A jewelry photo takes 15 to 40 minutes to retouch. That covers dust and fingerprints, a white background and metal tone, plus stones and prongs on the harder pieces. Multiply by your monthly volume, and compare the result with the roughly 160 working hours one person has in a month.
| Images a month | Editing hours at 15 to 40 min each | Share of one full-time retoucher |
|---|---|---|
| 50 | 12 to 33 hours | About a tenth to a fifth |
| 300 | 75 to 200 hours | About half, up to more than one person |
| 1,000 | 250 to 667 hours | About one and a half to four people |
The range is wide because the finish is. A plain silver band on white sits near 15 minutes. A pavé ring with focus-stacked frames and prong work sits near 40. A ring listing needs six shots per ring, so the image count grows faster than the product count. Clean capture also moves pieces toward the low end; our guide on how to photograph jewelry covers the shoot.
What in-house costs, and what outsourcing costs
On wages alone, in-house can look cheaper at low finish levels. Once you add the costs that come with an employee, and price the harder pieces, the gap closes or reverses. The table compares wages at Indeed’s US average with our standard level, $15 per photo, after the monthly volume discount.
| Images a month | In-house wages only ($24.99 an hour) | Outsourced at the standard level |
|---|---|---|
| 50 | About $310 to $830 | $750, minus 15% = $637.50 |
| 300 | About $1,870 to $5,000 | $4,500, minus 25% = $3,375 |
| 1,000 | About $6,250 to $16,660 | $15,000, minus 30% = $10,500 |
The wage figure is Indeed’s average of $24.99 an hour for a photo retoucher in the United States, from 45 salaries, updated November 3, 2026. Our prices are on the jewelry photo retouching page: $12 basic, $15 standard and $25 high-end per photo. For what other retouchers and AI tools charge, see what retouchers charge per image.
Hidden costs on both sides
Neither option costs only its headline number. In-house adds employment costs and idle time; outsourcing adds briefing time and a delay of a day. Count both before you compare.
In-house adds:
- Payroll taxes, benefits, holidays and sick days on top of the hourly wage
- Software subscriptions, a capable computer and a calibrated screen
- Training on jewelry work: metal tone, stones and prongs are a specialty
- Quiet months you still pay for, and peaks one person can’t cover
- Someone to check the work at 100% before it goes live
Outsourcing adds:
- Time to write a clear brief and agree a spec on the first order
- A day’s wait: most orders come back within 24 hours, not within the hour
- Upload time for large RAW files
- Less control over last-minute changes on the day of a launch
In-house or outsource jewelry photos: when each wins
In-house wins when volume is steady, the work is simple and changes happen daily. Outsourcing wins when volume swings, the pieces are hard or the team has no retoucher yet. Most shops fit one column clearly.
| Keep it in-house when | Outsource when |
|---|---|
| Volume keeps a retoucher busy most of the month, every month | Volume peaks for launches, holidays or wholesale season |
| You shoot and list daily and need edits within the hour | A next-day turnaround works for your listings |
| Most pieces are plain metal on white | Stones, pavé and high polish need specialist work |
| You already employ someone skilled with spare hours | Nobody on the team retouches today |
There are two exceptions. If your images are simple and the budget is tight, an AI tool may be enough. Our comparison of AI vs hand retouching covers where it holds up. And if you are a photographer weighing the same choice for weddings or portraits, our guide to outsourcing photo editing is written for you.
What the finish looks like
The fairest test is your own images, edited both ways. Whatever you compare, check it at 100%: dust, metal tone, stone detail and the edges. Here is that comparison on a sample edit we made.

For one spec held across a set, see our sample ring project: six photos of one ring, edited to a single written spec. It is a sample, not a client order.
How it works with us
Outsourcing to our retouching desk takes four steps, with a written quote inside an hour.
- Upload and brief. Send RAW or JPEG files through Drive, Dropbox or our FTP, with your spec.
- Quote. Choose the level and services; we reply with a written quote inside an hour.
- Review. A second retoucher checks every image at 100% before it ships; you review at full size and send notes.
- Deliver and revise. Files come back as JPEG, TIFF or layered PSD in your naming and folders. Revisions on anything we got wrong are free, with no round limit.
Turnaround is 24 hours for most orders, 12 hours on a priority plan, and two to three working days for collections of 500 or more.
What to check before choosing a retoucher
Whoever you hire, the same seven checks separate a reliable retoucher from a risky one. Ask each provider, us included, before the first paid order.
- A trial on your own images, not a portfolio of someone else’s
- A written quote per image and level, with volume pricing stated
- A second check at 100% before files ship
- Free revisions on errors, with the limit written down
- Turnaround in writing, including for large orders
- File security: an NDA and encrypted transfer for unreleased pieces
- One spec across orders, so a spring shoot and an autumn restock match
Frequently asked questions
Only when volume keeps them busy. At Indeed’s US average of $24.99 an hour, wages alone can undercut outsourcing on simple pieces. Below full-time volume, payroll costs, software, training and quiet months usually close the gap.
About 15 to 40 minutes per image. Plain metal on white sits at the low end; stones, pavé, focus stacks and prong work sit at the high end.
Yes. Many shops keep simple listing photos in-house and send stone-heavy pieces, launches and hero images out. Our single services start from $2.00 per photo for metal cleanup.
Ask before you send anything. We sign NDAs, transfer files encrypted, and route unreleased collections to a separate restricted queue.
Send notes on the full-size files. Revisions on anything we got wrong are free and uncapped, and the trial lets you judge the finish before you pay.
Try it on your own images
The quickest way to decide is to compare. Send us your trial images and edit the same files in-house; the trial is free, with no card or sign-up. Need 1,000+ images a month? Get a volume quote. Or see every level and service a professional jewelry retoucher on our team offers.


